Ember Placement; Rockwool Installation - Travis Industries Northfield GS2 Owner's Manual

Finalizing the Installation
34

Ember Placement

Place a layer of embers along the edges of the burner to achieve an aesthetic appearance. Also
place an ember over the screw on the right side of the burner (see photos below).

Rockwool Installation

The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the
rock wool is to brush it on to the burner. Compress a clump of rockwool between y our thumb and
forefinger. Use a stiff brush to apply a thin layer of rockwool fibers onto the burner . Do not use the
entire bag of rockwool. Use only a small amount and save the remainder. Over-use of rockwool will
diminish the glow and may cause sooting or other adverse conditions.
© Travis Industries
(for qualified installers only)
4121120 100-01315