Wire, Cable And Hose; Side Cowling Bracket; Shift Pedal; Brake Pedal - Yamaha T135SE Service Manual

a
YamahaT135.COM
Yamaha T135 Service Manual
INSTALLING THE ENGINE
b
1
2

WIRE, CABLE AND HOSE

1. Connect:
9starter motor lead coupler (T135SE)
9neutral switch lead coupler
9pickup coil lead coupler
9stator coil lead coupler
2. Install:
9crankcase breather pipe
9fuel cock vacuum hose
9spark plug cap

SIDE COWLING BRACKET

1. Install:
9side cowling bracket
9side cowling bracket bolts

SHIFT PEDAL

1. Install:
9sprocket cover
9shift pedal 1
9shift pedal bolt 2
NOTE:
Align the punch mark a in the shift pedal with
the punch mark b in the shift shaft.

BRAKE PEDAL

1. Install:
9brake pedal
9circlip
9brake pedal spring
9rear brake light switch spring

MUFFLER

1. Install:
9muffler
9washers
9nut
9upper muffler bolt
9washer
9lower muffler bolt
2. Install:
9exhaust pipe nuts
4-6
ENG
7 Nm (0.7 m·kg, 5.0 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
18 Nm (1.8 m·kg, 13 ft•lb)
38 Nm (3.8 m•kg, 27 ft•lb)
17 Nm (1.7 m•kg, 13 ft•lb)
15 Nm (1.5 m•kg, 11 ft•lb)