Installing The Starter Clutch (T135Se); Installing The Generator - Yamaha T135SE Service Manual

2
3
YamahaT135.COM
Yamaha T135 Service Manual
GENERATOR AND STARTER CLUTCH
1
4-42
EAS00355
INSTALLING THE STARTER CLUTCH
(T135SE)
1. Install:
9starter clutch 1
NOTE:
9While holding the generator rotor 2 with the
sheave holder, tighten the starter clutch bolt.
9Do not allow the sheave holder to touch the
projection on the generator rotor.
9Lock the threads on the starter clutch bolts by
staking them with a center punch.
Sheave holder
90890-01701
EAS00353

INSTALLING THE GENERATOR

1. Install:
9woodruff key
9generator rotor
9generator rotor nut
NOTE:
9Clean the tapered portion of the crankshaft
and the generator rotor hub.
9When installing the generator rotor, make sure
the woodruff key is properly sealed in the key-
way of the crankshaft.
2. Tighten:
9generator rotor nut 1
NOTE:
9While holding the generator rotor 2 with the
sheave holder 3, tighten the generator rotor
nut.
9Do not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
90890-01701
ENG
14 Nm (1.4 m•kg, 10 ft•lb)
70 Nm (7.0 m•kg, 50 ft•lb)