Checking The Cooling System - Yamaha T135SE Service Manual

Manual clutch and automatic, sniper / jupiter mx / spark 135 / exciter / 135lc
Hide thumbs Also See for T135SE:
Table of Contents

Advertisement

1
4
YamahaT135.COM
Yamaha T135 Service Manual
CHECKING THE COOLANT LEVEL/

CHECKING THE COOLING SYSTEM

3
2
5
3-24
cC
9 9 Adding water instead of coolant lowers the
antifreeze content of the coolant. If water is
used instead of coolant check, and if nec-
essary, correct the antifreeze concentration
of the coolant.
9 9 Use only distilled water. However, if dis-
tilled water is not available, soft water may
be used.
3. Start the engine, warm it up for several min-
utes, and then turn it off.
4. Check:
9coolant level
NOTE:
Before checking the coolant level, wait a few
minutes until it settles.
EAS00104
CHECKING THE COOLING SYSTEM
1. Remove:
9side cowlings (left and right)
9front cowling
Refer to "REMOVING THE SIDE COWL-
INGS" and "REMOVING THE FRONT
COWLING".
2. Check:
9radiator 1
9water pump inlet hose 2
9radiator outlet hose 3
9radiator inlet hose 4
9thermostat outlet hose 5
Cracks/damage → Replace.
Refer to "COOLING SYSTEM" in chapter 5.
3. Install:
9front cowling
9side cowlings (left and right)
Refer to "REMOVING THE FRONT COWL-
ING" and "REMOVING THE SIDE COWL-
INGS".
CHK
ADJ

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T135s

Table of Contents