Yamaha T135SE Service Manual page 122

a
b
d
c
YamahaT135.COM
Yamaha T135 Service Manual
4-16
CYLINDER HEAD
8. Check:
9"I"mark a
Align the "I" mark on the generator rotor
with the stationary pointer b on the
crankcase.
9"I"mark c
Align the "I"mark on the camshaft sprocket
with the stationary pointer d on the cylinder
head.
Out of alignment → Correct.
Refer to the installation steps above.
9. Measure:
9valve clearance
Out of specification → Adjust.
Refer to "ADJUSTING THE VALVE CLEAR-
ANCE" in chapter 3.
10. Install:
9O-rings
9water pump assembly
9water pump assembly bolts
11. Install:
9spark plug
13 Nm (1.3 m•kg, 9.5 ft•lb)
12. Install:
9intake manifold bolts
9intake manifold with carburetor
ENG
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)