Installing The Front Fork Legs - Yamaha T135SE Service Manual

YamahaT135.COM
Yamaha T135 Service Manual
7-37
FRONT FORK
6. Fill:
9front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
0.064 L (2.26 Imp.oz, 2.16 US oz)
Recommended oil
Fork oil 10W or equivalent
Front fork leg oil level a a (from the
top of the inner tube, with the inner
tube fully compressed and without
the fork spring)
104.5 mm (4.11 in)
NOTE:
9While filling the front fork leg, keep it upright.
9After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
7. Install:
9fork spring 1
NOTE:
Install the fork spring with the smaller pitch fac-
ing up.
EAS00662

INSTALLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Install:
9front fork leg 1
9front fork cap bolt 2
Temporarily tighten the lower bracket pinch
bolt.
NOTE:
Pull up the inner tube until it is stopped, then
install the front fork cap bolt 2.
2. Tighten:
9lower bracket pinch bolt 1
9front fork cap bolt 2
CHAS
43 Nm (4.3 m·kg, 31 ft·lb)
50 Nm (5.0 m·kg, 36 ft·lb)