YamahaT135.COM
Yamaha T135 Service Manual
VALVES AND VALVE SPRINGS
2
1
4-24
2. Remove:
9valve cotters 1
NOTE:
Remove the valve cotters by compressing the
valve spring with the valve spring compressor
2.
Valve spring compressor
90890-04019
Valve spring compressor
attachment
90890-04108
3. Remove:
9upper spring seat 1
9valve spring 2
9valve stem seal 3
9lower spring seat 4
9valve 5
NOTE:
Identify the position of each part very carefully
so that it can be reinstalled in its original place.
EAS00239
CHECKING THE VALVES AND VALVE
GUIDES
The following procedure applies to all of the
valves and valve guides.
1. Measure:
9valve-stem-to-valve-guide clearance
Valve-stem-to-valve-guide clearance =
Valve guide inside diameter a a –
Valve stem diameter b b
Out of specification → Replace the valve
guide.
Valve-stem-to-valve-guide
ance
Intake
0.010 – 0.037 mm
(0.0004 – 0.0015 in)
<Limit>: 0.08 mm (0.0032 in)
Exhaust
0.025 – 0.052 mm
(0.001 – 0.002 in)
<Limit>: 0.10 mm (0.0039 in)
ENG
clear-