2
YamahaT135.COM
Yamaha T135 Service Manual
1
1
7-47
STEERING HEAD
2. Check:
9bearings 1
9bearing races 2
Damage/pitting → Replace.
3. Replace:
9bearings
9bearing races
MMMMMMMMMMMMMMMMMMMMMMMM
a. Remove the bearing races from the steering
head pipe with a long rod 1 and hammer.
b. Remove the bearing race from the lower
bracket with a floor chisel 2 and hammer.
c. Install a new rubber seal and new bearing
races.
cC
If the bearing race is not installed properly,
the steering head pipe could be damaged.
NOTE:
9Always replace the bearings and bearing races
as a set.
9Whenever the steering head is disassembled,
replace the rubber seal.
LLLLLLLLLLLLLLLLLLLLLLLL
4. Check:
9lower bracket 1
(along with the steering stem)
Bends/cracks/damage → Replace.
CHAS