REAR SHOCK ABSORBER ASSEMBLY AND SWINGARM
1
YamahaT135.COM
Yamaha T135 Service Manual
1
7-50
EAS00691/EAS00702
REMOVING THE REAR SHOCK
ABSORBER ASSEMBLIES AND
SWINGARM
1. Stand the vehicle on a level surface.
w
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on a suitable stand so that the
rear wheel is elevated.
2. Remove:
9center panel
9rear cowlings (left and right)
Refer to "REMOVING THE REAR COWL-
INGS" in chapter 3.
9muffler
Refer to "REMOVING THE ENGINE" in
chapter 4.
9rear wheel
Refer to "REAR WHEEL AND BRAKE".
3. Remove:
9drive chain case bolts
9drive chain case 1
4. Remove:
9cotter pin
9washer
9brake torque rod 1
CHAS