Speakers - HP ENVY 14 Maintenance And Service Manual

Speakers

Description
Speakers
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Optical drive (see
b. Top cover (see
c. Power connector cable (see
d. System board (see
Remove the speakers:
Lift the speaker cable (1) and then remove the speakers (2).
▲
NOTE:
Reverse this procedure to install the speakers.
Battery on page
Optical drive on page
Top cover on page
System board on page
The speaker connection cable was removed when removing the system board.
29), and then remove the following components:
29)
37)
Power connector cable on page
48)
Spare part number
767262-001
58)
Component replacement procedures 59