10.
Disconnect the power button cable (2), the fingerprint reader cable (3), the keyboard cable (4)
and the TouchPad cable (5). Lift to remove the top cover (6).
When replacing the top cover, be sure that the following components are removed from the defective
top cover and installed on the replacement top cover:
Power button board and cable (see
●
Touchpad button board (includes cable and buttons), (see
●
on page
Fingerprint reader (includes bracket and cable), (see
●
Reverse this procedure to install the top cover.
40
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
44)
Power button board on page
TouchPad button board
Fingerprint reader on page
43)
45)