4.
Remove the battery from the computer (4).
To replace the battery, reverse the removal procedures.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-3
Speakers description and part number
Description
Speakers
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Disconnect the speaker cable (1) for each speaker from the system board.
2.
Remove the two Phillips M2.0 × 3.0 screws (2) from each speaker.
(Preparation for disassembly on page
Bottom cover on page
28).
Spare part number
N85246-001
28).
Battery on page
29).
Speakers
31