Frymaster FM45E Installation & Operation Manual page 31

4. Remove the metal filter screen and clean
thoroughly using a solution of hot water
and detergent. Allow the screen to dry
completely before reinstalling. Clean all
breading and food particles from the filter
pan, then replace the filter screen in the
bottom of the pan.
CAUTION
Make sure the inside of the pan is free
of all food and breading particles that
could prevent the paper from sealing
against the bottom of the pan.
5. Lay a sheet of filter paper over the top of
the filter pan with the paper overlapping
on all sides. Position the hold-down ring
over the filter paper on top of the pan and
lower the ring into the pan, allowing the
filter paper to fold up around the ring as it
is pushed to the bottom of the pan.
45 SERIES GAS FRYERS
CHAPTER 4: FILTRATION INSTRUCTIONS
6. Sprinkle filter powder over the filter paper.
For powder quantity and instructions, see
the powder manufacturer's instructions.
7. Replace the crumb tray in the filter pan.
8. Roll the filter pan all the way to the back
of the cabinet. The
illuminate when properly positioned.
4-5
light will
HEATER ON