Frymaster FM45E Installation & Operation Manual page 20

(191ºC). Press the Program Mode switch
to lock in the new setpoint (or the old
setpoint, if it was not changed). If the unit
is a dual vat fryer, sp-L will appear, al-
lowing the setpoint for the left vat to be
adjusted or confirmed.
5. selp (Select Product) will appear in the
left display. Press the product button to be
programmed (or press
normal operating mode).
6. sens (Sensitivity) appears in the left
display. Any previously programmed sen-
sitivity setting will appear in the right dis-
play. To change the sensitivity setting,
enter the new setting and press
it in. If the setting was not changed,
pressing accepts the previous setting.
Sensitivity is a built-in feature that adjusts
cooking time to compensate for the drop in
frypot temperature when a basket of prod-
uct is placed into it. Different food prod-
ucts will vary in density, basket load size,
and initial temperature. Food products
will also vary in how well cooked a prod-
uct is required to be. A proper sensitivity
setting for each product will assure a
high-quality product each time. For ex-
ample: four ounces of fries can be pro-
grammed to be cooked to the same quality
as two and one-half pounds. Some ex-
perimenting with the range of 0 - 9 (0 be-
ing least sensitive and 9 being most sensi-
tive) may be required to obtain the desired
quality to meet your specifications, but
setting 5 is the recommended starting
point.
7. cooc (Cook Time) will now show in the
left display. Any previously programmed
time will appear in the right display.
45 SERIES GAS FRYERS
CHAPTER 3: OPERATING INSTRUCTIONS
to return to the
to lock
Pressing will accept the current cook-
ing time. To change the cooking time,
enter the new time using the number keys.
Press to lock in the new time.
8. sh_ _ _ _ (Shake Time) appears in the left dis-
play. If your product requires shaking
during the cooking process, set the number
of seconds to cook before shaking using
the number keys.
For example, entering "30" means the
product needs to be shaken after it has
been cooking for 30 seconds. At the end
of 30 seconds, an alarm will sound and the
product switch will flash for 3 seconds. If
your product does not require shaking,
enter "0". The number entered will appear
in the right display. Press
programmed time.
9. hd_ _ _ _ (Hold Time) will appear in the left
display. Set the time the product may be
held before serving, anything from 13 sec-
onds to 60 minutes. If you do not wish to
use the hold time feature, enter 0. Press
to lock in the time.
In the event the same product is being
cooked in more than one basket, any prod-
uct button can be programmed to use the
hold timer normally used with a different
product button. Example: Program but-
ton 3 for 7:00 minutes hold time. Then,
when programming button R for hold time,
press address 4. Both product button 3
and product button R will then use the
same hold time of 7:00 minutes. The but-
ton numbers and their assigned address
numbers are:
Button: L 1 2 3 4 5 6 7 8 9 0 R
Address: 1 2 3 4 5 6 7 8 9 10 11 12
3-6
to lock in the