Switch Assignment Table; 10Ja, 10Jh, The Top Righ Switches Are Spring-Loaded And 2-Position; 10Ja Mode 2 Transmitters For Usa, The Top Left Switches Are Spring-Loaded And 2-Position; To Turn On The 10J System - FUTABA T10J Instruction Manual

• The factory default functions activated by the switches and VR for an 10JA Mode 2 for USA
transmitter are shown below.
• Most 10J functions may be reassigned to non-default positions quickly and easily.
• Basic control assignments of channels 5-10 are quickly adjustable in AUX-CH.
• Note that most functions need to be activated in the programming to operate.
switch commands. Always check that you have the desired switch assignment for each function
during set up.
First make sure the throttle stick is in the low throttle position.
you'll have an alarm until the stick is in the low position.
SWITCHES are spring-loaded and 2-position; on the 10JA
Push up to turn on.