Warning & Error Displays; Low Battery Error; Mixing Alert Warning; Backup Error - FUTABA T10J Instruction Manual

An alarm or error indication may appear on the display of your transmitter for a number of
LOW BATTERY ERROR: Warning sound: Continuous beep until transmitter is powered off.
The LOW BATTERY warning is displayed when the transmitter battery voltage drops below 4.1V.
MIXING ALERT WARNING: Warning sound: Several beeps repeated until problem resolved or
overridden.
functions described previously probably use the same switch and the OFF direction setting
reset the warning display by pressing both
of the switch settings of the duplicated mixings.

BACKUP ERROR:

The BACKUP ERROR
A setup of warning of each sensor can be performed in TELEMETRY .
The MIXING ALERT warning is displayed to alert you whenever
you turn on the transmitter with any of the mixing switches
active. This warning will disappear when the offending switch
or control is deactivated. Switches for which warnings will be
/
has been erased and is not available. Return your transmitter to
Futaba for service.
KEY
: all programming