the altitude information from an optional altitude
sensor or GPS sensor. The altitude of the model
(low) than preset altitude, you can be told by alarm.
To show warning by vibration can also be chosen.
Data when a power supply is turned on shall be 0
m, and it displays the altitude which changed from
there. Even if the altitude of an airfield is high,
*Atmospheric pressure is changed according to the weather also
Alert set : High side
*When the + - key simultaneous press, the rate is reset to the
initial value.
that shall be 0 m and the altitude difference from
altitude from atmospheric pressure. Atmospheric
pressure will get lower as you go up in altitude,
using this the sensor will estimate the altitude.
Please understand that an exact advanced display
cannot be performed if atmospheric pressure
changes in a weather situation.
Alert set : Low side
*When the + - key simultaneous press, the rate is reset to the
initial value.
Jog key