Range Check The Radio; To Activate The Power Down Mode And Perform A Range Check; Servo Test Operation At The Time Of Power Down Mode - FUTABA T10J Instruction Manual

be certain the system has adequate operational range.
We have installed a special "Power Down Mode" in the T10J in order to perform an operational
range of the T10J.
down the JOG KEY and then turn the transmitter switch
on. A power mode screen is displayed. Press the JOG
KEY to select the Power Down function. When this
mode is active the red LED on the lighting from of
the transmitter will provide users with an audible and
visual indication that the transmitter is in the "Power
display "POWER DOWN MODE". The words "POWER
DOWN MODE" will blink as an additional reminder
that the transmitter is in the "Power Down Mode".
should be able to walk approximately 30-50 paces from the model without losing control.
transmitter in a safe yet accessible location so it will be within reach after starting the engine. Be certain the throttle
and the engine running at various speeds.
connections or binding pushrods. Also be certain that the battery has been fully charged.
JOG KEY JOG KEY is moved down and CH is displayed.
*Control is impossible and your
model crashes.
END KEY and complete power down mode. Set the
+ KEY is pressed and it is made ACT.