Console Redirection - Fujitsu PRIMERGY BX922 S2 Operating Manual

Server menu
6.8.4

Console Redirection

Port Specifies the port for communication with the terminal (Serial 1 or
Disabled). The Disabled setting switches the terminal functionality off.
I
When set to Disabled the other items in this submenu disappear.
Baud Rate
Defines the specified baud rate (115.2K, 57.6K, 38.4K, 19.2K, 9600).
I
This item is only hidden if "Port" is set to Disabled.
Protocol
Specifies the transfer protocol (ANSI, VT100, VT-UTF8, VT100+).
I
This item is only hidden if "Port" is set to Disabled.
Flow Control
Specifies how the transfer is controlled via the port. The setting (None,
XON/XOFF) must be the same at both the terminal and server.
I
This item is only hidden if "Port" is set to Disabled.
Continue C.R. after POST
Specifies whether communication with the terminal is also possible whilst
the operating system is being loaded (On) or not (Off).
I
This item is only hidden if "Port" is set to Disabled.
76 Operating Manual
BIOS Setup
BX922 S2