Ssd Hard Disks - Fujitsu PRIMERGY BX922 S2 Operating Manual

SSD hard disks

9.1 SSD hard disks
One or two 2.5-inch SSD hard disk drives can be installed in the PRIMERGY
BX922 S2 dual-socket server blade.
Figure 17: Numbering of the SSD hard disks
The SSD hard disks are installed on top of each other in a frame. The first SSD
hard disk (SSD0) is installed in the bottom part of the frame, the second (SSD1)
in the top part. Figure
SSD hard disk.
V
CAUTION!
SSD hard disks may only be removed by a service technician.
The SDD modules (drives) must all be clearly marked so that they can
be put back in their original places if they are removed. If this is not
done, existing data can be lost.
Information about RAID configurations or RAID levels is available in
the RAID controller documentation.
92
SSD1
SSD0
17 shows an SSD hard disk frame that is fitted with one
Operating Manual
Replacing CSS components
BX922 S2