Fujitsu PRIMERGY BX922 S2 Operating Manual page 65

BIOS Setup
Disabled
No port is activated.
Port 1
PORT 1 is activated.
Port 1 & 2
Both ports are activated.
Port n Remote Boot
Specifies whether onboard LAN n OPROM is active during the
POST.
Disabled
PXE
iSCSI
I
Mezzanine card n: type Remote Boot
Defines whether the OPROM of he mezzanine card n of type Fibre
Channel or Ethernet is active during the POST (Enabled) or not (Disabled).
I
This item does not appear if the required mezzanine card is
missing.
BX922 S2
The function is deactivated.
PXE is activated.
iSCSI is activated.
The "Port 1 Remote Boot" item does not appear if "LAN
Controller n" is set to Disabled.
The "LAN Controller 1/Port 1 Remote Boot" item is usually
set to PXE.
The "Port 2 Remote Boot" item is only displayed if "LAN
Controller n" is set to Port 1&2.
Operating Manual
Advanced menu
65