Added Drive Reported As Defective; Error Message On Screen - Fujitsu PRIMERGY BX922 S2 Operating Manual

Troubleshooting and tips
8.8

Added drive reported as defective

RAID controller is not configured for this drive
The drive was probably installed when the system was switched off.
Ê Reconfigure the RAID controller for the drive using the corresponding utility.
Information is provided in the documentation for the RAID controller.
or
Ê Remove and reinstall the drive while the system is switched ON.
If the hard disk drive continues to be shown as defective, then replace it (see
"SSD hard disks" on page
8.9

Error message on screen

The meaning of the error message is explained in the documentation for the
relevant components and programs on the PRIMERGY ServerView Suite
DVD 2.
BX922 S2
Added drive reported as defective
92).
Operating Manual 89