Opening The Server Blade - Fujitsu PRIMERGY BX922 S2 Operating Manual

SSD hard disks
9.1.1

Opening the server blade

Ê Exit all applications and shut down the server blade correctly. If your
operating system has not switched off the server, press the on/off button on
the server blade control panel.
Removing the server blade from the system unit
Figure 19: Removing the server blade
Ê Push the locking lever (1) up slightly to unlock the release lever (2).
Ê Swivel the release lever down until it is horizontal.
Ê Pull the server blade out of the system unit.
94 Operating Manual
Replacing CSS components
BX922 S2