Table of Contents
Advertisement
Installation and operation
I
The controller has its own configuration utility. For further information,
refer to the "Embedded MegaRAID Software User's Guide" (on the
PRIMERGY ServerView Suite DVD 2 under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI RAID / SCSI Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.
5.3.3
Configuring the server and installing the operating
system with the ServerView Installation Manager
Using the ServerView Installation Manager on the PRIMERGY
ServerView Suite DVD 1 provided, you can conveniently configure the server
and install the operating system. This includes configuring the server-specific
settings using the ServerView Configuration Manager and configuring the RAID
controller using the ServerView RAID Manager.
Advantages of the ServerView Installation Manager
– Wizard assisted configuration of your server hardware and disk arrays
– Wizard assisted installation of all leading server operating systems
– Wizard-assisted creation of configuration files for unattended installation of
several PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I
The software that can be installed depends on your server's hardware
configuration. This configuration is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.
To find out how to operate the ServerView Installation Manager and for further
information, refer to the associated manual.
If you are using the ServerView Installation Manager, you can skip the following
section on how to configure the server and install the operating system.
Continue from section
BX922 S2
"Cleaning the Server Blade" on page
Operating Manual
Configuring the Server Blade
51.
49
Advertisement
Table of Contents
