SSD hard disks
Ê Connect the SATA cable and the power cable of the SSD hard disk to the
connectors on the system board.
9.1.3
Closing the server blade
Figure 31: Closing the server blade
Ê Place the server blade cover on the housing about 1-2 cm from the frame so
that it lies flush on both sides.
Ê Slide the cover forward in the direction of the arrow until it engages.
Ê Install the server blade in the system unit, see
the system unit" on page
102
36.
Operating Manual
Replacing CSS components
"Installing the Server Blade in
BX922 S2