Fujitsu PRIMERGY BX922 S2 Operating Manual page 38

Installing the Server Blade in the system unit
Installing the dummy module
To install the dummy module, follow the same procedure as for removing it,
except in reverse order.
Installing the Server Blade
V
CAUTION!
Follow the safety instructions and information in section
Electrostatic-Sensitive Devices" on page
Figure 3: Installing the Server Blade
Ê Open the release lever (1).
Ê Push the server blade as far as possible into the slot.
38
30.
Operating Manual
Installing the hardware
"Modules with
BX922 S2