Connecting Devices - Fujitsu PRIMERGY BX922 S2 Operating Manual

Connecting devices

4.3 Connecting devices
All connections that are required to operate the server blade are made via the
midplane of the PRIMERGY BX900 system unit. When the server blade is
installed, midplane contacts automatically establish connections to the
infrastructure modules on the rear of the system unit:
– Power supply units
– Management blade(s) for server administration
– Ethernet and/or fiber-channel connection blades for connection to a LAN or
SAN
You can find information about the external ports of the BX900 system unit in
the relevant operating manual.
The front of the server blade has a port for a special Y cable, which provides 4
USB ports, 1 VGA port and 1 serial port.
Figure 5: Ports on the front
1 Plug connection to the server blade. The labeled side of the plug must face left when
plugged in.
2 VGA port
4 USB ports (4x)
Table 2: External ports on the front
I
The Y cable is delivered with the system unit.
40
3 Serial port
5 Y cable port on the server blade
Operating Manual
Installing the hardware
BX922 S2