Replacing CSS components
Figure 29: Connecting the cables to the SSD hard disk
Ê Place the mounting frame on the mounting plate with an offset of approx. 1
cm and push it as far as it will go in the direction of the arrow (1). The
mounting frame clicks into place in its final position.
Figure 30: SSD hard disk connections on the system board
1
Power supply SSD0
3
SATA SSD1
Table 3: SSD hard disk connections on the system board
BX922 S2
2
SATA SSD0
4
Power supply SSD1
Operating Manual
SSD hard disks
101