Fujitsu PRIMERGY BX922 S2 Operating Manual page 99

Replacing CSS components
Installing an SSD hard disk
Figure 25: Fitting the SSD hard disk into the guide element.
Ê Fit the SSD hard disk into the green plastic guide element. The 4 clips of the
guide elements (see circles) must engage in the holes of the SSD hard disk.
Figure 26: Inserting the SSD hard disk in the mounting frame.
Ê Slide the SSD hard disk with the guide element into the mounting frame.
Make sure that the clips of the guide element (see circles) engage in the
openings of the mounting frame (1).
BX922 S2
Operating Manual
SSD hard disks
99