Completion; Closing The Server Blade - Fujitsu PRIMERGY BX920 S2 Options Manual

11

Completion

V
CAUTION!
Follow the safety instructions in the chapter
page 15.
11.1

Closing the server blade

Figure 44: Closing the Server Blade
Ê Place the server blade cover on the housing about 1-2 cm from the frame so
that it lies flush on both sides.
Ê Slide the cover forward in the direction of the arrow until it engages.
Ê Insert the server blade in the system unit.
I
You insert the server blade in the opposite order to that described in
"Removing the Server Blade from the system unit" on page
BX920 S2
Options Guide
"Safety instructions" on
19.
67