AMT Datasouth documax 3300 User Manual page 97

Menu 4: Printer Control (Cont'd)
Printer Displays
DGCL xxxxxxx
Exit Mode xxxxxx
Command Char
Overlap xxxxxxx
DW Term
See Chapter 6 in Programmer's Manual for barcode programming.
Values
Disable
Enable
Adjust
Return
No Adj
BC-300
xxx 33
255
Disable
Enable
Disable
Enable
Description
Disables recognition of Barcode Transparency
commands
Enable recognition of Barcode Transparency
Commands
Adjust the form to the next logical line feed
boundary upon exiting the Barcode Task
mode.
Return the form to the last active vertical
position upon exiting the Barcode Task
mode. See the ^J000 command
Position the form directly below the last
printable pass of the Task mode upon
exiting the Task mode
Emulates the Barcode 300 exit mode.
Defines the default command character
Example: 94 represents the [^] character
Disables one dot overlap when printing
barcodes
Enables one dot overlap when printing
barcodes
Double wide print is not affected by line
terminations
Double wide print is cancelled by CR, LF, FF,
and VT
Valid only when DS-180 Emulation is
selected.
User's Guide
Features and Profiles 4-21