User's Guide
1.8
Printer Self Test
This test is used to verify printer operation. Before performing the printer self-test, refer to
Section 3.3 Load Forms Page 3-3 for instructions on loading paper in the printer.
To start the test:
1.
Load 8-1/2" forms.
Open the Keypad Door.
2.
Press the Feature
3.
Press the Enter Key. Printer self test will start (Figure 1-10). The display will
4.
alternate between the following:
The self-test may be stopped by pressing the Enter key or by closing the Keypad
5.
Door.
1-20 Keypad Configuration
CAUTION
MARGINS ARE SET FOR 8.5" PAPER.
PRINTING OFF OF FORM WILL LEAD
TO PRINTER DAMAGE.
Key once. LCD will show "RUN SELF TEST".
<Diagnostics>
'Enter' To Stop