AMT Datasouth documax 3300 User Manual page 103

Menu 8: Form Thickness Control
Printer Displays
Auto Form Gap
Quiet or Whisper
Adj. Form Gap xxx
Hor Gap Pos xx.x
VR Gap Pos xx.x
Values
Allows the user to perform an immediate
automatic form thickness adjustment.
Thickest part of form should be used when
making this adjustment.
High This feature determines method and impact of
Medium a print line.
Low
Quiet – the printer prints at full character per
second values.
Whisper – the printer prints half of the
character in the first pass and the other half
in the second pass.
The high, medium and low values are available
in specific optional configurations.
0-198 Allows the user to specify/change the form
thickness distance.
Units
Pressing Value
gap to decrease by 1 unit.
Pressing Value
gap to increase by 1 unit.
0.0" Allows the user to have the printer perform
. auto form gapping at any horizontal
. position on the print line in tenths of an
8.8" inch.
0.0" Allows the user to have the printer perform
. auto form gapping at any vertical position
. on the paper.
Form
This is in tenths of an inch and is limited by
Length in
the current form length.
inches
User's Guide
Description
key causes form thickness
key causes form thickness
Features and Profiles 4-27