User's Guide
Epson FX (Cont'd)
ASCII
Command
ESC !
ESC #
ESC %
ESC &
ESC *
ESC –
ESC /
ESC 0
ESC 1
ESC 2
ESC 3
ESC 4
ESC 5
ESC 6
ESC 7
ESC 8
ESC 9
ESC :
ESC <
ESC =
ESC >
ESC ?
G-2 Escape Sequence Quick Reference
Master Print mode selection
Cancel Most Significant Bit (MSB) function.
Select character set from ROM or from RAM.
Define User-defined characters in RAM
Select Graphic mode.
Select/Cancel underlining.
Select Vertical Tab Channel.
Set line spacing to 1/8 inch.
Set line spacing to 7/72 inch.
Set line spacing to 1/6 inch.
Set line spacing to n/216 inch.
Select italic character set.
Cancel italic character set.
Enable upper character set (80 hex to 9F hex and FF hex).
Enable extended control codes (Turns off ESC 6).
Disable paper out detector.
Enable paper out detector.
Copies resident characters (ROM) to RAM.
Enable one line unidirectional printing.
Set MSB to 0 (Sets 8
Set MSB to 1 (Sets 8
Reassign graphic codes.
Epson FX
Command Description
th
bit low).
th
bit high).