AMT Datasouth documax 3300 User Manual page 79

In this sample, change from printing "Reports" to "Checks" as follows:
1. Take printer off line by pressing the On/Off Line key.
2. Park current form.
3. Change to desired profile, in this case "checks".
4. Load the appropriate forms ("checks").
5. Place unit on line.
For an application that is not stored in a profile, call up the profile whose features most
closely match the application and reprogram only the features requiring change. These
changes will not alter the profile's permanent settings unless you save them when you exit
Setup Mode.
User's Guide
Features and Profiles 4-3