H3 Harness Wire Connection Guide; Harness Wiring Diagram; Harness Wiring Guide - Clifford AvantGuard 5.1 Installation Manual

H3 harness wire connection guide

harness wiring diagram

___
H3/1
BLACK/GREEN
___
H3/2
VIOLET/WHITE
___
H3/3
WHITE/BLACK
___
H3/4
WHITE/VIOLET
___
H3/5
RED
___
H3/6 BLUE/ORANGE
___
H3/7
BLACK
___
H3/8 BLUE/BLACK
___
BLUE/YELLOW.
H3/9
___
H3/10 BLUE/GREEN
___
BLUE/WHITE
H3/11
___
BLACK/GRAY
H3/12

harness wiring guide

h3/1 black/green automatic transmission mode
This wire needs to be grounded when IntelliStart is installed.
h3/2 violet/white remote start smart lock
This wire produces a 200mA negative output when the remote start has been activat-
ed locking the doors during the remote start sequence. Connect this to the lock wire
of the vehicle, only if the doors must be unlocked to remote start the vehicle.
© 2006 directed electronics—all rights reserved
Battery Positive (5-amp fuse) 12V (+) Input
Negative Switching Wait-To-Start Bulb (Diesel)
Positive Switching Wait-To-Start Bulb (Diesel)
warning! This system is intended for automatic transmis-
sion, fuel-injected vehicles only. Installation in a standard
transmission vehicle maybe dangerous and is contrary to its
intended use.
Automatic Transmission Mode (-)
Remote Start Smart Lock
Hood Trigger Input (-)
Factory Alarm Disarm
Third Ignition Trigger (Status Out)
Shut Down (+)
Brake Light Input (+)
RPM Input
Ground
15