Clifford concept 50x Owner's Manual
  1. Manuals
  2. Brands
  3. Clifford Manuals
  4. Car Alarm
  5. concept 50x
  6. Owner's manual
Clifford concept 50x Owner's Manual

Clifford concept 50x Owner's Manual

Clifford owner's manual world-class auto security concept 50x
Hide thumbs Also See for concept 50x:
Table of Contents

Advertisement

Quick Links

Download this manual
World-Class Auto Security
TM
concept
50x
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Clifford concept 50x

Summary of Contents for Clifford concept 50x

  • Page 1 World-Class Auto Security concept Owner's Manual...
  • Page 2 The Concept 50x is covered by one or more of the following Clifford Electronics U.S.A. patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375; 5,467,070 and other patents pending.

  • Page 3: Table Of Contents

    Table of Contents Standard Features of the Concept 50x Your 4-button/12-channel remote controls ..... 6 How to use your keychain remote control ..... . . 6 What each button/channel does Anti-CodeGrabbing (ACG) with Random Code Encryption .

  • Page 4: Standard Features Of The Concept 50X

    That makes code-grabbing utterly useless against the Clifford Concept 50x. UltraSecure Coded Valet Mode™ your Concept 50x like they can all other brands of alarms. Remote Controlled Valet Mode Entry and Exit your remote control, you can enter or exit valet mode. Indicator light flashes visually confirm valet mode entry and exit.
  • Page 5 Standard Features of the Concept 50x Remotely Adjustable Dual-Zone Proximity Sensor provide full protection: If someone is lurking near your car, the system will sound a warning tone. But if a thief actually leans into the passenger compartment, the system will instantly blast the siren. It is impervious to...
  • Page 6 Your Concept 50x will even identify the specific trigger or sensor that detected the intrusion attempt. Remote Controlled Courtesy Lighting...
  • Page 7 Patented Smart AutoTesting sensors every time you remotely arm and warns you if you accidentally arm your Concept 50x system with the hood or trunk open. If there is a genuine trigger or sensor malfunction, the system will specifically identify the problem, thereby eliminating time-consuming and costly trouble-shooting.

  • Page 8: Your 4-Button/12-Channel Remote Controls

    (this works better than holding the button down). The 4-button/12-channel remote control is the key to your system. It has Clifford’s Anti-CodeGrabbing (ACG) technology for the ultimate protection against “code-grabbing” devices (see page 8). You will use your remote to arm and disarm...

  • Page 9: What Each Button/Channel Does

    What each button/channel does Your Concept 50x remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 16-20). The following chart indicates what each remote control channel number does, and how to transmit each channel number.

  • Page 10: Anti-Codegrabbing (Acg) With Random Code Encryption

    Your remote control will never transmit the same code twice, and the control unit will never accept the same code twice. Thus the code recorded and played back by the thief’s code-grabber will never be accepted by your Concept 50x. Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm instead of the usual one chirp, it means that a trigger or sensor was activated in your absence.

  • Page 11: How To Interpret The Chirps And Indicator Light Flashes

    30 seconds after you park the vehicle, exit, and close all the vehicle doors. For your convenience, if you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed. Concept 50x has these additional AutoArming features: AutoArming enable/disable: the AutoArming feature.

  • Page 12: Ultrasecure Coded Valet Mode

    UltraSecure™ Coded Valet Mode In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system.

  • Page 13: To Exit Valet Mode

    To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Concept Series systems have the same factory-set code, it is highly advisable that you set your own valet code.

  • Page 14: Remote Controlled Valet Mode Entry And Exit

    Remote controlled valet mode entry and exit You can even enable or exit valet mode with your remote control simply by transmitting channel 9 (LevelShift twice, then button 1). In addition to the above indications, two parking light flashes will confirm that you have remotely enabled valet mode, while a single flash confirms exiting of valet mode.

  • Page 15: Built-In Two-Point Autoimmobilizer

    Indicator will repeatedly flash to indicate that AutoImmobilization has been activated. Even if a thief were to cut all the wires or even find the Concept 50x control unit and disconnect it, he would still be unable to start the engine.

  • Page 16: Automatic Malfunction Bypass

    False alarms are usually caused by a car alarm’s sensor that either cannot detect the difference between normal environmental conditions and a genuine theft attempt or, in the case of your Concept 50x, has its sensor sensitivity set too high (see Remote Sensor Adjustments on page 12). Clifford’s exclusive FACT feature ensures you’ll never experience repeated false alarms.

  • Page 17: Smart Self-Powered Siren With Digital Comlink

    (the change is permanent and cannot be changed again). Your Concept 50x siren is different. As shipped from the factory, it sounds six different alarm sounds. However, you may turn any of the six sounds on or off to create a different combination of sound patterns.

  • Page 18: User-Selectable Features

    User-selectable features Your Concept 50x allows you to set many of its features to your own personal preferences. Although the system’s capabilities are extensive, we made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times.
  • Page 19 EXAMPLE 1: Turn on AutoArm & Lock When the system AutoArms (see page 9), it does not normally lock the doors to ensure that you cannot accidentally lock the keys inside the vehicle. To enable this feature, you’ll note that “AutoArm & Lock” is in column 3, row 2 of the table on pages 19-20. The “...

  • Page 20: Adding New Remote Controls

    Adding new remote controls For other drivers in your family, or if you wish to control Concept 50x systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer and program them into the system yourself. Each Concept 50x will respond to as many as four 12-channel ACG remote controls.

  • Page 21: Table Of User-Selectable Features

    The LED will illuminate. If it does not, the new code you programmed and the one you just entered do not match. The system has reverted to the previous code. © Copyright Clifford Electronics, Inc., 1996 Column 4 4th latched...

Table of Contents