Oki OKIFAX 5750 Service Manual page 40

Fine
Ex-Fine (15.4 line/mm)
Ex-Fine (600 dot/inch)
No. Item
18
Copy resolution
19
Recording method
20
Recording paper skewing
21
Copy darkness
22
Copy uniformity
23
Recording paper running
out
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
7.7 ~ 9.93
15.4 ~ 19.87
600 ~ 774
Specifications
l
STD: 200 dot/inch x 3.85 line/mm
l
FINE/PHOTO: 300 dot/inch x 300 dot/inch
l
EX-FINE: 600 dot/inch x 15.4 line/mm, 600 dpi/inch x 600
dot/inch*
* This function can be set only when 8 MB option memory
board is installed and 600 DPI Function is set to ON (User
setting).
Electro-photographic printing
l
211.3mm (4992 bits) LED printhead
Maximum allowable skew is + or - 1 mm over an advance of
100 mm.
1) Black image: Greater than 1.2 OD *
2) White background: Not greater than 0.2 OD
Note:
OD: (Optical density)
Printed copies will exhibit a uniform density of the printed and
background area:
1) From edge to edge: 25%
2) From copy to the next copy: 30%
The fax can detect the no-paper condition by a photosensor.
When the paper has run out in the local copy operation, the
scanning will stop with "PAPER OUT/JAM" on the LCD and an
ALARM LED turns on without an alarm tone.
When the paper has run out while a message is being received
and the no-paper reception is activated, the LCD display will
show "MSG. IN MEMORY", and the ALARM LED turns on.
7.7 ~ 10.57
15.4 ~ 21.15
600 ~ 824