Oki OKIFAX 5750 Service Manual page 362

19 Restrict access
20 ECM function
21 Closed network
If the remaining memory capacity is not satisfied the instant dial start
condition although this setting is ON, the feeder transmission is
performed. When this setting is OFF, the feeder transmission is
uniformly performed.
1) Setting values
ON (Instant dialing transmission is performed)/OFF
(Instant dialing transmission is not performed)
Determine whether operation is to be restricted.
When ON is selected, persons who do not know the password cannot
operate the machine.
When ON is selected, the standby screen requires the operator to enter
the password. Operation is restricted until a valid password is entered.
1) Setting values
ON (Operation is restricted)/OFF (Operation is not restricted)
ON: The ID/Password Prg. allows a restrict ID to be registered.
Operation is restricted only when this setting is ON and a restrict ID has
already been registered.
OFF: The ID/Password Prg. disables registration of a restrict ID.
When this setting is OFF, operation is not restricted irrespective of
whether a restrict ID has been registered.
Determine whether ECM transmission is to be performed.
1) Setting values
ON (ECM transmission performed)/OFF (ECM transmission not
performed)
Set up closed network.
The TSI/CSI of the remote machine is compared with the low-order 4
digits of the speed dial of the local machine.
If they match, closed network is performed. If they do not match, closed
network is not performed.
1) Setting values
OFF: Closed network is not performed.
TX/RX: Closed communication is performed for both transmission and