Oki OKIFAX 5750 Service Manual page 295

Service Personnel Initial Settings Table 2.9.2.3 (8/11)
T.F. Item
No.
26 LED heat strobe
Service Guide OKIFAX 5750/5950
Chapter 2 Installation
Specifications
Set the LED head strobe time. The larger the value, the darker
the image.
1) Setting values
00000 to 11111 (5 bits)
Note1: When the rank marking of the new replaced LED print
head (new part) is same as that of the old used LED print head
(old part), you do not always have to set the LED print head
strobe signal.
Note2: Intensity ranking is determined by the first, second and
third digits from the right on the LED print head serial number.
(i.e. in ...061, 061 is the intensity ranking.)
Note3: Setting values are not initialized even though All Data
Clear is performed.
Setting of Technical Function No. 26
Page: 107