Oki OKIFAX 5750 Service Manual page 363

22 Toner save
23 Sender ID
24 1st paper size
25 2nd paper size
26 Power save mode
reception.
RX: Closed communication is performed only for reception.
Determine whether toner saving is to be performed during fax printing.
When a LAN/PC printer is used, this setting is ignored and the
command from the host is executed.
1) Setting values
ON (Toner saving performed)/OFF (Toner saving is not performed)
Determine whether the sender ID is to be added to the sending data.
A maximum of 32 characters are added to only outside the document.
1) Setting values
ON (Added)/OFF (Not added)
OKIFAX 5750/5950 Set the size of recording paper in the first cassette.
As the recording paper size is not detected automatically, the operator
must set it. EXEC./JIS-B5/A5/A6 can be set only when LAN is mounted.
1) Setting values
A4/LETTER/LEGAL 13/LEGAL 14/EXEC./JIS-B5/A5/A6
* The setting data must be transferred to the G4 board.
Set the size of recording paper in the second tray.
EXEC./JIS-B5/A5 can be set only when LAN is mounted.
1) Setting values
A4/LETTER/LEGAL 13/LEGAL 14/EXEC./JIS-B5/A5
* The setting data must be transferred to the G4 board.
Determine whether the current mode is to be switched to the Power
Save mode.
The power supply will be fed to all circuits of a fax machine whenever
the fax goes to the operating state.
The power save mode has reduced the power consump-tion at standby