Oki OKIFAX 5750 Service Manual page 360

11 Monitor volume
12 Buzzer volume
13 User language
* This mode is automatically switched to the FAX mode when TEL/FAX
switch is set to OFF.
2) TAD (TAD/FAX AUTO SW.) mode (auto answer mode)
This mode can be selected except when TAD is set to OFF (TYPE1-3).
* This mode is automatically switched to the FAX mode when TAD
MODE is set to OFF.
3) MEM. (MEMORY RX) mode
When a memory password was set, this mode cannot be switched to
another mode without entering the set password.
* When printing memory data without returning to the standby state (the
flash memory is has not been written with data in the new mode) after
switching between modes under the above condition, the password
need not been entered again.
4) PC mode (PCFAX mode)
This mode can be selected only when MFPUNLOCK (hidden setting) is
set to ON (default).
5) FWD (FORWARDING) mode (redirecting mode)
This mode can be selected when FORWARDING No. has been
programmed.
* This mode is automatically switched to the FAX mode when
FORWARDING No. is erased.
* When G4 is selected, neither T/F nor TAD cannot be selected.
Set the monitor volume.
1) Setting values
OFF/LOW/MID./HIGH-MID./HIGH selectable
Set the buzzer volume (communication end or off-hook alarm).
1) Setting values
LOW/MIDDLE/HIGH selectable.
* The key touch sound level is fixed at LOW.
Select the language used for LCD display or report printing.
1) Setting values