B.3.2.3 Paper Feed Monitoring - Oki OKIFAX 5750 Service Manual

B.3.2.3 Paper Feed Monitoring

Status
Paper supply error
Transport system jam 1
Transport system jam 2
Transport system jam 3
Paper size error
Paper outlet jam 1
Paper outlet jam 2
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIFAX 5750/5950
Chapter B Print Operation Description
Description and Supervising Sensor
Indicates monitoring error in hopping. Hopping
is retried 3 times.
Indicates an error in the paper transport path.
Error on resist roller section. From resist ON
to write sensor (PS2) ON.
From inlet sensor OFF up to write sensor
OFF.
Indicates an error in the paper transport
system. Error of transfer roller and/or heat
roller. From write sensor ON to outlet sensor
ON.
Indicates paper size other than specified one.
From resist sensor ON to OFF.
Supervises slipping of the recording paper.
From outlet sensor ON to OFF.
Supervises jamming at the near paper outlet.
From outlet sensor ON to OFF. When a
crumpled recording paper is detected, the
outlet sensor is set to "OFF" earlier than
usual.
Page: 301
Distance
118 mm or less path
Length +36 (hopping) x 3
30 mm or less
Inlet ~ write +20
44 mm or less
207 mm or less
Write ~ outlet +69
Recording paper +/- 45 mm
Recording paper +/- 45 mm
135 mm or less: NG