Oki OKIFAX 5750 Service Manual page 297

Service Personnel Initial Settings Table 2.9.2.3 (9/11)
T.F. Item
No.
27 Media type
28 Transfer roller latch
current
29 V34 TX retry
30 Symbol rate
31 NSF switch
Service Guide OKIFAX 5750/5950
Chapter 2 Installation
Specifications
Set the recording paper quality (thickness).
1) Setting values
M (Medium)/MH (Thicker than medium)/H (Thick) selectable.
Set an imprinting latch current value.
1) Setting values
-2/-1/0/+1/+2 selectable.
Determine whether the V34 communication error is to be
remembered.
1) Setting values
ON: Remembered
OFF: Nor remembered
Set the V.34 modem symbol rate.
1) Setting values
2400/2800/3200/3429 selectable.
Determine whether the NSS/NSF signal is to be sent out.
1) Setting values
ON: Sent
OFF: Not sent
* If data is transmitted with this setting OFF, DCS OKIFAX
5750/5950 transmission is performed (NSC is not sent) even if
the Oki NSF is received.
Relay initiate transmission operation cannot be performed.
* If REMOTE DIAGNOSIS is set to ON although NSF Switch (this
setting) is set to OFF, an NSF is sent and sent immediately if
Oki's original function is ON (confidential, etc.).
Page: 108