* To bring the LCD up to Technical Function, press MENU key once, RESOLUTION key twice (In case of no message in memory).
Note:
When the rank marking of the replaced LED print head (new part) is the same as that of the used LED print head (old part), you do not always have to set
the LED print head drive time.
Adjustment:
1) Turn AC power ON.
2) Setting of LED print head should be according to the Table 5.1.1 in the next section.
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)