D-Link xStack DGS-3420 Series Reference Manual page 420

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameters Description:
portNum: The port number.
vlanID: the VLAN ID number.
Event Description: The number of VLAN in which loop back occurs hit the
specified number.
Log Message:
Loop VLAN number overflow.
Parameters Description:
None
IMPB
Event description: Dynamic IMPB entry conflicts with static ARP.
Log Message: Dynamic IMPB entry conflicts with static ARP(IP: <ipaddr>,
MAC: <macaddr>, Port <[unitID:]portNum>)
Parameters description:
ipaddr: IP address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: Dynamic IMPB entry conflicts with static FDB.
Log Message: Dynamic IMPB entry conflicts with static FDB(IP: [<ipaddr> |
<ipv6addr>], MAC: <macaddr>, Port <[unitID:]portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: Dynamic IMPB entry conflicts with static IMPB.
Log Message: Dynamic IMPB entry conflicts with static IMPB(IP: [<ipaddr> |
<ipv6addr>], MAC: <macaddr>, Port <[unitID:]portNum>).
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: Creating IMPB entry failed due to no ACL rule being
available.
Log Message: Creating IMPB entry failed due to no ACL rule being
available(IP:[<ipaddr> | <ipv6addr>], MAC: <macaddr>, Port
<[unitID:]portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: IMPB checks a host illegal.
Log Message: Unauthenticated IP-MAC address and discarded by IMPB (IP:
[< ipaddr > | < ipv6addr >], MAC :< macaddr >, Port <[unitID:]portNum >).
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: Dynamic IMPB entry conflicts with static ND
Log Message: Dynamic IMPB entry conflicts with static ND (IP: [< ipaddr > | <
ipv6addr >], MAC: <macaddr>, Port <[unitID:]portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Traffic Control Event description: Broadcast storm occurrence.
Log Message: Port <portNum> Broadcast storm is occurring.
Parameters description:
portNum: The port number.
Event description: Broadcast storm cleared.
Log Message: Port <portNum> Broadcast storm has cleared.
Parameters description:
410
Informational
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Informational