D-Link xStack DGS-3420 Series Reference Manual page 287

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
System Maximum
Address (1-3328)
Unit
From Port / To Port
Admin State
Lock Address Mode
Max Learning Address
(0-3328)
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the View Detail button to display the information of the specific entry.
Click the View Detail button to see the following window.
The fields that can be configured are described below:
Parameter
VLAN Name
VID List
Max Learning Address
(0-3328)
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Enter the system maximum address.
Select the unit you want to configure.
Use the drop-down menus to select a range of ports to configure.
Use the drop-down menu to enable or disable Port Security (locked MAC address
table for the selected ports).
This drop-down menu allows the option of how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are:
Permanent – The locked addresses will never age out unless users manually delete
the entries, reboot or reset the Switch.
DeleteOnTimeout – The locked addresses will age out after the aging timer expires.
DeleteOnReset – The locked addresses will not age out until the Switch has been
reset or rebooted.
Specify the maximum value of port security entries that can be learned on this port.
Figure 8-53 Port Security Port-VLAN Settings window
Description
Click the radio button and enter a VLAN name.
Click the radio button and enter a list of VLAN ID.
Enter the maximum number of port security entries that can be learned by this VLAN.
If this parameter is set to 0, it means that no user can be authorized on this VLAN.
If the setting is lower than the number of current learned entries on the VLAN, the
command will be rejected. Tick the No Limit check box to have unlimited number of
port security entries that can be learned by a specific VLAN.
The default value is No Limit.
277