D-Link xStack DGS-3420 Series Reference Manual page 427

Xstack dgs-3420 series layer 2 managed stackable gigabit switch web ui reference guide
Hide thumbs Also See for xStack DGS-3420 Series:
Table of Contents

Advertisement

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Screening
Traffic Control
swPktStormOccurred
swPktStormCleared
swPktStormDisablePort
ERPS
swERPSSFDetectedTrap
swERPSSFClearedTrap
swERPSRPLOwnerConflictTrap
MSTP
newRoot
topologyChange
CFM
dot1agCfmFaultAlarm
CFM Extension
swCFMExtAISOccurred
swCFMExtAISCleared
SwCFMExtLockOccurred
swCFMExtLockCleared
Port Trap
linkup
linkDown
The same illegal DHCP server IP address
detected is just sent once to the trap receivers
within the log ceasing unauthorized duration.
Binding objects:
(1) swFilterDetectedIP
(2) swFilterDetectedport
When packet storm is detected by packet storm
mechanism and take shutdown as action.
Binding objects:
(1) swPktStormCtrlPortIndex
When the packet storm is clear.
Binding objects:
(1) swPktStormCtrlPortIndex
When the port is disabled by the packet storm
mechanism.
Binding objects:
(1) swPktStormCtrlPortIndex
Signal fail detected on node.
Binding objects:
(1) swERPSNodeId
Signal fail cleared on node.
Binding objects:
(1) swERPSNodeId
RPL owner conflicted on the ring.
Binding objects:
(1) swERPSNodeId
The newRoot trap indicates that the sending agent
has become the new root of the Spanning Tree;
the trap is sent by a bridge soon after its election
as the new root, e.g., upon expiration of the
Topology Change Timer, immediately subsequent
to its election. Implementation of this trap is
optional.
A topologyChange trap is sent by a bridge when
any of its configured ports transitions from the
Learning state to the Forwarding state, or from the
Forwarding state to the Blocking state. The trap is
not sent if a newRoot trap is sent for the same
transition. Implementation of this trap is optional
This trap is initiated when a connectivity defect is
detected.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP enters
AIS status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP exits
AIS status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP enters
lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP exits
lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when port linkup.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
(3) ifOperStatus
A notification is generated when port linkdown.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
417
0.0.1
1.3.6.1.4.1.171.12.25.5.
0.1
1.3.6.1.4.1.171.12.25.5.
0.2
1.3.6.1.4.1.171.12.25.5.
0.3
1.3.6.1.4.1.171.12.78.4.
0.1
1.3.6.1.4.1.171.12.78.4.
0.2
1.3.6.1.4.1.171.12.78.4.
0.3
1.3.6.1.2.1.17.0.1
1.3.6.1.2.1.17.0.2
1.3.111.2.802.1.1.8.0.1
1.3.6.1.4.1.171.12.86.10
0.0.1
1.3.6.1.4.1.171.12.86.10
0.0.2
1.3.6.1.4.1.171.12.86.10
0.0.3
1.3.6.1.4.1.171.12.86.10
0.0.4
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3420-28sc

Table of Contents