xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Edit Class button, the following page will appear:
The fields that can be configured are described below:
Parameter
Class Name
Begin Address
End Address
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Edit button to re-configure the specific entry.
Click the Delete By Name button to remove the specific entry based on the name.
Click the Delete By Address button to remove the specific entry based on the address.
DHCP Server Class Settings
On this page, the user can configure the DHCP server class settings.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Class Settings as
shown below:
The fields that can be configured are described below:
Enter the DHCP Option 43 string used here.
Figure 9-12 DHCP Server Pool Settings (Edit Class) Window
Description
Enter the DHCP class's name used here. This name can be up to 12 characters long.
Enter the beginning IP address used for the DHCP pool here.
Enter the ending IP address used for the DHCP pool here.
Figure 9-13 DHCP Server Class Settings window
315