D-Link xStack DGS-3420 Series Reference Manual page 413

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
our device.
unitID: 1.Interger value;2.Represent the id of the device in the stacking
system.
portNum: 1.Interger value;2.Represent the logic port number of the device.
ipif_name: The name of the interface of the switch which has the conflic IP
address.
Telnet Event description: Successful login through Telnet.
Log Message: Successful login through Telnet (Username: <username>, IP:
<ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Login failed through Telnet.
Log Message: Login failed through Telnet (Username: <username>, IP:
<ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Logout through Telnet.
Log Message: Logout through Telnet (Username: <username>, IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Telnet session timed out.
Log Message: Telnet session timed out (Username: <username>, IP:
<ipaddr>).
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Interface Event description: Port link up.
Log Message: Port <[unitID:]portNum> link up, <link state>
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the stacking
system.
portNum: 1.Interger value;2.Represent the logic port number of the device.
link state: for ex: , 100Mbps FULL duplex
Event description: Port link down.
Log Message: Port <[unitID:]portNum> link down
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the stacking
system.
portNum: 1.Interger value;2.Represent the logic port number of the device.
802.1X Event description: 802.1X Authentication failure.
Log Message: 802.1X Authentication failure [for <reason> ] from (Username:
<username>, Port: <[unitID:]portNum>, MAC: <macaddr> )
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of thr authenticated device.
Event description: 802.1X Authentication successful.
Log Message: 802.1X Authentication successful from (Username:
<username>, Port: <[unitID:]portNum>, MAC: <macaddr>)
Parameters description:
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of the authenticated device.
RADIUS Event description: VID assigned from RADIUS server after RADIUS client is
authenticated by RADIUS server successfully .This VID will be assigned to
the port and this port will be the VLAN untagged port member.
Log Message: RADIUS server <ipaddr> assigned VID :<vlanID> to port
<[unitID:]portNum> (account :<username> )
Parameters description:
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of RADIUS assigned VLAN.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
403
Informational
Warning
Informational
Informational
Informational
Informational
Warning
Informational
Informational